|
|
|
|
Part Number - 48-3245 |
System Includes
Options
|
|
| INDICATED USE: Radiation monitoring SYSTEM OPERATION: Typically located at the scale/entrance area. The system will continuously monitor incoming materials for radiation. DETECTORS: 2 ea. 2"(5.1cm) diameter X 2"(5.1cm) thick shielded NaI(Tl) scintillation detectors with weathertight housings. CONNECTORS: BNC (Others available on request) DISPLAY: 4 digit LED display with 0.8"(2 cm) high characters DISPLAY UNITS: kCPM STATUS:(green light) indicates the instrument is functioning properly LOW ALARM: Indicated by yellow LOW ALARM light and slow beep (1 per second) audible tone (can be set at any point from 0.0 - 9999) HIGH ALARM: Indicated by red HIGH ALARM light and slow beep (4 per second) audible tone (can be set at any point from 0.0 - 9999) LOW BAT: (yellow) indicates less than 2 hours of battery power remaining. OVERLOAD: Senses detector saturation (indicated by display reading "-OL-") OVERRANGE: Indicates radiation field being measured has exceeded counting range of instrument (indicated by display reading "----") REMOTE(optional): Allows for connection of red strobe for remote indication of an alarm POWER: 95 - 135 VAC (178 - 240 VAC available), 50 - 60 Hz single phase (less than 100 mA), 6 volt sealed lead acid rechargeable battery (built-in) BATTERY LIFE: Typically 48 hours in non-alarm condition; 12 hours in alarm condition BATTERY CHARGER: Battery is continuously trickle charged when instrument is connected to line power and turned on CONSTRUCTION:Aluminum housing with polyurethane enamel paint TEMPERATURE RANGE: -20° F(-29° C) to 140° F(60° C) SIZE:(Electronics) 7.4" (18.7 cm)H X 9.7" (24.6 cm)W X 2.5" (6.4 cm)D (Detectors) 3.5" (8.9 cm)Diameter X 8.8" (22.4 cm)L WEIGHT:(Electronics) 6.5 lbs (2.3 kg) (Detectors) 12.7 lbs(5.8 kg) each |
|
|
|
|
|
|
|
