MODEL 375-30RWM
WASTE MONITOR

Please call for pricing

INDICATED USE: Radiation monitoring
SYSTEM OPERATION: Typically located at the scale/entrance area. The system will continuously monitor incoming materials for radiation.
DETECTORS: 2 ea. 3"(7.6cm) diameter X 1"(2.5cm) thick shielded NaI(Tl) scintillation detectors in NEMA 4x weather tight enclosures.
DISPLAY: 4 digit LED display with 0.8"(2 cm) high characters
DISPLAY UNITS: kCPM
STATUS:(green light) indicates the instrument is functioning properly
LOW ALARM: Indicated by yellow LOW ALARM light and slow beep (1 per second) audible tone (can be set at any point from 0.0 - 9999)
HIGH ALARM: Indicated by red HIGH ALARM light and slow beep (4 per second) audible tone (can be set at any point from 0.0 - 9999)
LOW BAT: (yellow) indicates less than 2 hours of battery power remaining.
OVERLOAD: Senses detector saturation (indicated by display reading "-OL-")
OVERRANGE: Indicates radiation field being measured has exceeded counting range of instrument (indicated by display reading "----")
REMOTE(optional): Allows for connection of red strobe for remote indication of an alarm
POWER: 95 - 135 VAC (178 - 240 VAC available), 50 - 60 Hz single phase (less than 100 mA), 6 volt sealed lead acid rechargable battery (built-in)
BATTERY LIFE: Typically 48 hours in non-alarm condition; 12 hours in alarm condition
BATTERY CHARGER: Battery is continuously trickle charged when instrument is connected to line power and turned on
CONSTRUCTION:Aluminum housing with polyurethane enamel paint
TEMPERATURE RANGE: -20 degrees F(-29 degrees C) to 140 degrees F(60 degrees C)
SIZE:(Electronics) 7.4" (18.7 cm)H X 9.7" (24.6 cm)W X 2.5" (6.4 cm)D
(Detectors) 13" (33 cm)H X 17" (43.2 cm)W X 8.5" (21.6 cm)D
WEIGHT:(Electronics) 6.5 lbs (2.3 kg)
(Detectors) 32 lbs(14.5 kg) each