|
Model 3532/3534 Waste Monitors |
||||||||||||||||
|
|
|||||||||||||||
| INDICATED USE: Waste monitoring SENSITIVITY: Will detect a un-shielded 40 microCi Cs-137 source at 10' from the detector and a un-shielded 10 microCi Cs-137 source at 5 feet from the detector ALARM: Indicated by a red lamp and audible tone (greater than 60 dB at 2 feet full volume ) NOTE: Alarm will automatically reset when contaminated material is removed from the detector area. METER DIAL: 0 - 20 microR/hr, and 0 - 1.5 kV LINEARITY: Reading within plus or minus 10% of true value with detector connected OUTPUT: 102 - 135 VAC (fused 5 Amp) duplex receptacle allowing for connection of alarm strobe, bell, and/or horn CALIBRATION CONTROLS: Accessible from front of instrument (protective cover provided ) RESPONSE: Dependent on number of counts present, typically 9 seconds from 10% to 90% of final reading PORTAL OPENING: Adjustable from 36"(91.4cm) - 84"(213.4cm) wide with a height of 77"(195.6cm) POWER: 95 - 135 VAC (178 - 240 VAC available), 50 - 60 Hz single phase (less than 100 mA) METER: 2.5" (6.4 cm) arc, 1 mA analog type CONSTRUCTION: Aluminum housing with beige polyurethane enamel paint TEMPERATURE RANGE: -4° F(-20° C) to 122° F(50° C) May be certified for operation from -40° F(-40° C) to 150° F(65° C) SIZE: 79"(200.7cm)H X 29.6"(75.2cm)D Minimum Width: 73.2"(185.9cm) Maximum Width: 121.2"(307.9cm) SHIPPING SIZE: 96"(243.8cm)H X 48"(121.9cm)W X 36"(91.4cm)D
|
||||||||||||||||
|
|
||||||||||||||||
