|
UNIDOSŪ |
|
|
 |
|
UNIDOS is a secondary standard and reference class dosemeter for
universal use. UNIDOS displays the measured values of dose, dose rate,
charge, and current in Gy, Sv, R, Gy/min, Sv/h, R/min, Gy·m, C or A. Ion
chambers including a CT probe and solid state detectors can be used with
UNIDOS. Air density corrections are performed by keying-in air pressure
and temperature or by means of a radioactive check device.
|
|
| The check device
data are stored in a data base. UNIDOS includes automatic noise
suppression and an automatic built-in system test. |
|
Features:
- Suitable for
high precision dosimetry acceptance tests of X-ray equipment using
ionization chambers
- Features high
accuracy, long-term stability, excellent resolution and wide dynamic
measuring ranges
- Complies with
IEC 61674 and IEC 60601-1
- Suitable as a
reference class dosemeter according to IEC 60731 for radiation therapy
and as an in-vivo dosemeter according to IEC 60601-2-9 for patient
contact measurement
- Includes an
extensive detector library for storage of detector data and calibration
factors
|
|
| |
|
UNIDOSŪ E |
|
|
 |
|
The lightweight and compact field class dosemeter UNIDOS E is ideally
suited for routine measurements in diagnostic radiology. It measures
dose, dose rate, dose length product, charge and current. The displayed
units are Gy, Gy/min, R, R/min, Gy·m, C and A. It can be used with a
variety of ionization chambers and solid state detectors.
|
|
| A CT probe can be
connected to measure the dose length product in Gy·m for dosimetry in
computed tomography. Air density corrections of the sensitive chamber
volume are made by keying-in the air pressure and temperature. |
|
Features:
- Combines high quality with
good value
- Suitable for standard
dosimetry in diagnostic radiology and radiation therapy
- Features high accuracy and
excellent resolution (1 fA)
- Meets and exceeds the
requirements for field-class dosemeters according to IEC 61674 and IEC
60731
|
|